*
*
* *
* * *
*
*
* *
* * *
*
*
* *
* * *
*

Sole Source Heating - UFHS 200 Watts/m2

UFHS has been designed for sole source of heating in conservatories and other areas. At 200 Watts/m2 the UFHS mat system is the most powerful on the market. The system is ultra thin, adding only 5mm to the floor depth once installed. It is available in two different widths (500mm and 1000mm) so it can be used in any size or shaped area. The system can be installed either directly beneath the tiles or in the screed for off peak electricity use.

If using underfloor heating for sole source heating, it is very important to have insulation either under the screed or directly below the heating.

To make sure the heat output is sufficient we offer a design service, where we can calculate both the heat requirement of the area and the amount of heating mat that needs to be installed.

If you would like to make an enquiry or place an order, please contact us or find a local supplier.
*
*

Technical Data

Operating Voltage:
230/240V

Output:
200 Watts/m2

Width:
0.5m and 1.0

Size:
1m2 - 8m2 &
8m2 - 18m2

Guarantee:
10 years

The UFHS range has been tested and emits a magnetic field that is lower than IRPA limits.

© The Floor Warming Company • Domoteck House • Unit C • Eskdale Road • Uxbridge UB8 2RT.
Tel 01895 257995 • Fax 01895 258027
| top of page