Controlling your underfloor heating
It is essential to control your underfloor heating to keep energy waste to a minimum.
If using your heating for a floor warming system you will need a programmable floor thermostat with just a floor sensor.
If you are using the heating without any additional form of heating (radiators) you can use a programmable thermostat with an air & floor thermostat.
|
132F - Programmable Floor Thermostat (15 amp) |
 |
|
- Offers total control of the system.
- Floor sensor allows accurate measurement of the floor temperature.
- Allows 100% efficiency.
- 7 day, fully programmable so you can set the times you want the heating to be operational (also available with an air and floor sensor for sole source heating).
- 4 settings per day.
- 2 year guarantee.
Instructions & Technical specification
|
|
TPT88 – 7 day Programmable Floor Warming Thermostat |
 |
|
- Offers total control of the system.
- Floor sensor allows accurate measurement of the floor temperature.
- Allows 100% efficiency.
- 7 Day, Fully programmable so you can set the times you want the heating to be operational.
- 3 year guarantee.
- 6 settings per day
- Pre-programmed for quick set-up
Instructions & Technical specification
|
|
TPT44 – 16 amp 24hr Programmable Thermostat |
 |
|
- Offers total control of the system.
- Floor sensor allows accurate measurement of the floor temperature.
- Allows 100% efficiency.
- 3 year guarantee.
- Multiple settings per day
- 24 Hour, programmable so you can set the times you want the heating to be operational (also available with an air and floor sensor for sole source heating).
Instructions & Technical specification |
|
TPT1 - 16 amp Floor Thermostat
|
 |
|
- Regulates the floor temperature.
- Has a floor sensor included.
- With manual on/off switch
(non-programmable).
Instructions & Technical specification
|
|
Residual Currency Device: RCD10WL |
 |
|
- This is a safety device (circuit breaker), which is essential for the validation of the guarantee and to comply with IEE guidelines. Please contact us for more details.
Instructions & Technical specification |
|
UFH Alarm |
 |
|
It’s a good idea to install a damage alarm when installing UFH in-case of accidental damage. Please contact us for more details.
Instructions |
|
Relay |
 |
|
If you wish to use more heating mats than the UFH control is capable of running, you can use a 25amp relay. Please contact us for more details.
Instructions |
